Direct phase measurement of waveguides with a next generation optical vector spectrum analyzer | Light: Science & Applications

Light: Science & Applications volume 13, Article number: 293 (2024) Cite this article

Metrics details

A novel dual-mode optical vector spectrum analyzer is demonstrated that is suitable for the characterization of both passive devices as well as active laser sources. It can measure loss, phase response, and dispersion properties over a broad bandwidth, with high resolution and dynamic range.

Spectroscopy is one of the most critical characterization technologies for scientific research and industrial engineering1. Recently, the field has undergone significant development due to growth in the application space that has created strong demand for devices with improved performance, reduced power consumption, and small footprint2,3. As the device platforms become miniaturized, the manifestation of dispersive effects becomes highly significant4. This consideration is particularly important in the context of integrated optics5. In the presence of these effects careful frequency calibration is required, which can be performed using an optical vector network analyzer.

Optical vector network analyzers characterize the transmission, loss, phase response, and dispersion of a passive device by measuring the linear transfer function6. Conventional designs can be broadly grouped into three operating principles: interferometric7, optical channel estimation8,9, and sideband modulation10,11. The sideband modulation category can further be broken down into single-sideband and double-sideband devices. Interferometric devices utilize a tunable laser in conjunction with a combination of interferometers, one of which contains the device under test. The transfer function is extracted by performing signal processing on the interferogram. Optical channel estimation devices operate similarly to coherent optical orthogonal frequency-division multiplexing systems, where comparison between transmitted and received symbols is used to infer the transfer function. Sideband modulation devices operate by using an optical passband filter and a modulated probe laser incident on the device being tested to generate an asymmetric output signal that encodes the transfer function of the device, which can then be reconstructed. In terms of performance, these techniques can achieve a high resolution, however their bandwidth is limited. This renders them unsuitable for characterization of broadband devices such as optical frequency combs, parametric oscillators/amplifiers, and supercontinuum sources.

In a recently published paper in Light: Science & Applications, a research team led by Professor Junqiu Liu from the Shenzhen International Quantum Academy has developed a novel dual-mode optical vector spectrum analyzer that is capable of characterizing the transfer function of passive devices, as well as perform analysis on optical sources by coherently mapping an optical spectrum into the radio frequency domain12. It operates over a broad bandwidth, with high resolution and dynamic range. In this design a chirped laser is either transmitted through a device being tested, or interfered with an optical source being tested. In the case of the device, the transfer function can be extracted by interfering the transmitted signal with that from a reference path. In the case of the optical source, the interference produces a progressive radio frequency beatnote signal from which the spectral information can be recovered. In both cases the output signal is a time-domain interferogram from which the frequency-domain response can be recovered using digital signal processing. The success of this approach requires precision calibration of the chirped laser frequency, which is accomplished by the incorporation of a fiber resonant cavity to acts as a frequency ruler. Remarkably the system does not incorporate any sort of high-speed modulators/detectors, and it does not require any active feedback mechanism (see Fig. 1 in the original manuscript12 for a schematic of the device in the configuration for characterizing passive devices, which is reproduced here). The design itself is highly extensible, and can be adapted to other spectral ranges by the addition of appropriate chirped lasers.

a The principle of our VSA is based on a chirping CW laser that is sent to and transmits through a device under test (DUT), or interferes with any light under test (LUT). The DUT can be any passive device, and the LUT can be any broadband laser source. The transmission spectrum of the chirping laser through the DUT, and the beatnote signal generated from the interference between the chirping laser and the LUT, are both time-domain traces. Together with a “frequency ruler” for calibration, the chirping laser coherently maps the time-domain trace into the frequency domain. This trace carries the information of the DUT’s loss, phase and dispersion over the chirp bandwidth (blue). For LUT, the chirping laser beats progressively with different frequency components of the optical spectrum, thus, analyzing the beat signal in the RF domain allows extraction of the spectral information (purple). Critical to this frequency-time mapping is precise and accurate calibration of the instantaneous laser frequency during chirping. This requires referring the chirping laser to the frequency ruler (red). b Experimental setup. The chirping laser unit can be a single laser, or multiple lasers that are bandwidth-cascaded. The latter allows extension of the full spectral bandwidth by seamless stitching of individual laser traces into one trace. The chirping laser power is then split into two branches. The upper branch is directed to the frequency-calibration unit (i.e. the “frequency ruler”), which in our case, is a phase-stable fiber cavity of 55.58 MHz FSR. The lower branch is sent to the DUT or the LUT. For the two branches, the photodetector signals are recorded with an oscilloscope and digitally processed offline. PD photodetector, OSC oscilloscope. Note that the figure and caption are reproduced from the original manuscript12

Finally, in the paper, it is experimentally demonstrated that with minor modifications the base vector spectrum analyzer system can be employed to additional applications, including light detection and ranging (LiDAR) and mapping frequency comb spectra. It is also speculated that the system can be applied to “… time-stretched systems13, optimized optical coherent tomography (OCT)14, linearization of FMCW LiDAR15, and resolving fine structures in Doppler-free spectroscopy16.” This serves to underscore the utility of the design approach, and suggests exciting directions for future research.

Savage, N. Spectrometers. Nat. Photonics 3, 601–602 (2009).

Article ADS Google Scholar

Yang, Z. Y. et al. Miniaturization of optical spectrometers. Science 371, eabe0722 (2021).

Article ADS Google Scholar

Li, A. et al. Advances in cost-effective integrated spectrometers. Light Sci. Appl. 11, 174 (2022).

Article ADS Google Scholar

Xu, H. N. et al. Breaking the resolution-bandwidth limit of chip-scale spectrometry by harnessing a dispersion-engineered photonic molecule. Light Sci. Appl. 12, 64 (2023).

Article ADS Google Scholar

Foster, M. A., Moll, K. D. & Gaeta, A. L. Optimal waveguide dimensions for nonlinear interactions. Opt. Express 12, 2880–2887 (2004).

Article ADS Google Scholar

Sandel, D. et al. Optical network analysis and longitudinal structure characterization of fiber Bragg grating. J. Lightwave Technol. 16, 2435–2442 (1998).

Article ADS Google Scholar

Gifford, D. K. et al. Optical vector network analyzer for single-scan measurements of loss, group delay, and polarization mode dispersion. Appl. Opt. 44, 7282–7286 (2005).

Article ADS Google Scholar

Jin, C. et al. High-resolution optical spectrum characterization using optical channel estimation and spectrum stitching technique. Opt. Lett. 38, 2314–2316 (2013).

Article ADS Google Scholar

Yi, X. et al. Characterization of passive optical components by DSP-based optical channel estimation. IEEE Photonics Technol. Lett. 24, 443–445 (2012).

Article ADS Google Scholar

Tang, Z. Z., Pan, S. L. & Yao, J. P. A high resolution optical vector network analyzer based on a wideband and wavelength-tunable optical single-sideband modulator. Opt. Express 20, 6555–6560 (2012).

Article ADS Google Scholar

Xue, M., & Pan, S. L. Ultrahigh-resolution optical vector analysis based on single-sideband modulation. In: 2016 URSI Asia-Pacific Radio Science Conference (URSI AP-RASC) 1–3 (IEEE, 2016).

Luo, Y. H. et al. A wideband, high-resolution vector spectrum analyzer for integrated photonics. Light Sci. Appl. 13, 83 (2024).

Article ADS Google Scholar

Mahjoubfar, A. et al. Time stretch and its applications. Nat. Photon 11, 341–351 (2017).

Article ADS Google Scholar

Adler, D. C. et al. Three-dimensional endomicroscopy using optical coherence tomography. Nat. Photonics 1, 709–716 (2007).

Article ADS Google Scholar

Roos, P. A. et al. Ultrabroadband optical chirp linearization for precision metrology applications. Opt. Lett. 34, 3692–3694 (2009).

Article ADS Google Scholar

Meek, S. A. et al. Doppler-free Fourier transform spectroscopy. Opt. Lett. 43, 162–165 (2018).

Article ADS Google Scholar

Download references

Qualcomm Institute, University of California San Diego, 9500 Gilman Dr, La Jolla, CA, 92093, USA

Andrew Grieco

You can also search for this author in PubMed Google Scholar

Correspondence to Andrew Grieco.

The author declares no competing interests.

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.

Reprints and permissions

Grieco, A. Direct phase measurement of waveguides with a next generation optical vector spectrum analyzer. Light Sci Appl 13, 293 (2024). https://doi.org/10.1038/s41377-024-01574-3

Download citation

Published: 19 October 2024

DOI: https://doi.org/10.1038/s41377-024-01574-3

Anyone you share the following link with will be able to read this content:

Sorry, a shareable link is not currently available for this article.

Provided by the Springer Nature SharedIt content-sharing initiative